Logo image
CaCl2 as a hardening accelerator for air lime-metakaolin slurries: Effects of two different types of metakaolin on kinetics, rheology and microstructure
Journal article   Open access   Peer reviewed

CaCl2 as a hardening accelerator for air lime-metakaolin slurries: Effects of two different types of metakaolin on kinetics, rheology and microstructure

Leane P.B. Sales, Aline F. da Nóbrega, Ana C.V. da Nóbrega, Raphaele de L.M. de C. Malheiro, Marylinda S. de França and Prannoy Suraneni
Applied clay science, Vol.292, 108302
2026-11

Abstract

Admixture accelerating Hardening time Lime-pozzolan paste Rotational rheometry
Lime–metakaolin (MK) slurries/mortars offer several advantages; however, their setting times are typically 5–7 times longer than those of Portland cement-based systems, which hinders practical application. This study evaluates calcium chloride (CaCl₂), a widely used accelerator in cementitious systems but not previously explored in air lime–MK pastes, focusing on hardening kinetics, early-age microstructure, and rheology. Two metakaolins (MK1 and MK2), differing in chemical composition (notably Al₂O₃ and Fe₂O₃ contents), amorphicity, particle morphology and size distribution, were investigated with CaCl₂ additions of 5% and 10% (by binder mass). Hardening kinetics were assessed by Vicat needle penetration and semi-adiabatic calorimetry, while fresh-state behavior was characterized by mini-slump and rotational rheometry; early-age phase assemblage and morphology were examined by XRD and SEM. Mortar compressive strength was also evaluated. CaCl₂ exhibited a metakaolin-dependent effect, accelerating hardening in lime–MK1 slurries but delaying hardening in lime–MK2 slurries. Reference lime–MK slurries generally followed the Herschel–Bulkley model, whereas CaCl₂ promoted a transition toward Bingham behavior and reduced shear stresses. XRD and SEM evidenced the formation of Friedel's salt in CaCl₂-containing pastes, particularly in lime–MK2, consistent with MK2 higher aluminum content; concomitantly, its presence was associated with a disruption in development of monocarboaluminate and strätlingite. Mortar compressive strength followed the same metakaolin-dependent trend upon CaCl₂ addition, increasing for MK1 and decreasing for MK2. These results demonstrate that CaCl₂ does not act as a universal accelerator in lime–MK systems and that the metakaolin characteristics govern the early-age kinetic and rheological response. •Metakaolin-dependent hardening effects with CaCl2.•CaCl2 accelerated less reactive MK1, but delayed amorphous, high-Al2O3 MK2.•Flow behavior shifted from Herschel–Bulkley to Bingham after CaCl2 addition.•Friedel's salt altered hydrate development in Al-rich MK.•CaCl2 increased strength in MK1 systems, but decreased it in MK2.
url
https://doi.org/10.1016/j.clay.2026.108302View
Published (Version of record) Open

Metrics

3 Record Views

Details

Logo image