Abstract
The presence of island grains in the initial finished sheets of grain-oriented electrical steel is inevitable in the preparation of ultra-thin strips. Owing to their distinctive shape and size effects, their deformation behavior during rolling differs from that of grain-oriented electrical steels of conventional thickness. This study focuses on the orientation evolution and deformation heterogeneity of island grains during rolling. Four types of island grains with orientations of {210} , {110} , {114} , and {100} were selected and modeled within the Goss-oriented matrix using full-field crystal plasticity finite element (CPFEM) simulation under plane strain compression. The results are then compared with corresponding experimental measurements. The results reveal that orientation rotation and grain fragmentation vary among the island grains of different orientations, with the first two orientations exhibiting more significant deformation heterogeneity compared to the latter two. Additionally, the orientations of the island grains significantly affect the distribution of residual Goss orientations within the surrounding matrix. Pancake-like island grains exhibit a higher degree of orientation scatter and greater deformation heterogeneity in the central layer compared to their spherical counterparts. The initial {210} island grains can form a cube orientation, which can be optimized by subsequent process control to enhance magnetic properties.