Abstract
Thoraco-lumbar osteoporotic compression fractures have a higher incidence of continued collapse with development of deformity and progression to vertebra plana when untreated and even after vertebral augmentation (VA) or balloon kyphoplasty (BKP). Even when there is the restoration of height and improvement in angulation, multiple long-term follow-up series have repeatedly documented that over time, many patients lose the initial height correction and in a smaller group the vertebral body re-collapses leading to the development of progressive deformity with an increased risk for adjacent level fractures. At first, larger balloons and more cement were used to try and avoid these problems, but it did not reduce the risk of adjacent fractures. Several procedures were developed to place various types of intervertebral implants combined with bone cement to maintain the initial height correction. Initial studies with these implants showed a reduction in adjacent level fractures but the systems did not proceed to market. The SpineJack
(SJ) system (Stryker Corp, Kalamazoo, MI), consisting of bilateral expandable titanium implants supplemented with bone cement, was first used approximately 10 years ago in Europe and recently gained FDA approval in the United States. This system provides more symmetric and balanced lateral and anterior support and is effective with lesser amounts of bone cement compared to BKP. Follow-up studies have documented that there is equal or better pain control, with better long-term results based both on maintaining vertebral height restoration and deformity correction. Most importantly, statistically it clearly reduces the risk of adjacent level fractures by at least 60%. The biomechanical effects of intravertebral implants for osteoporotic fractures in regard to the risk of adjacent level fractures and preliminary experience with the use of the SJ
is reviewed.
